Loading sintered calcium aluminate slag in factory
At present, most steel plants in the world generally adopt Ladle refining, to reduce gas inclusion and make molten steel evenly, in order to realize high yield, high quality and low cost steel- making. So Calcium Aluminate slag is designed and manufactured to meet the above requirement and take a very important role in steel refining.
Sintered calcium aluminate slag which is also named sintered synthetic flux,synthetic slag,this material has good performance of desulphurization ,deoxygenation and reducing impurities for refining liquid steel,is widely used in most steel plants. It applies to LF,SKF,VHP and other refining facility.
Features and advantages of our sintered calcium aluminate slag :
1.Low molten point, fast molten, shorten refining time and energy consuming.
2.Good fluidity, desulphurization and inclusion reducing
3.No flame, no dust emission, no poisonous ,eco-friendly and good safety in use
4.material shape in lump and grit with average element
5.Desulphurization rate reach 90%
6.Reducing nonmetallic inclusion and improve steel quality
7.Add little or without flourspar into ladle,that will reduce consumption of refractories and increase life of ladle
8.Good stability
9. No water absorption and no metamorphosing ,easy for storage and transportation
Typical specification of sintered calcium aluminate slag:
Item No. | CaO(%) | Al2O3(%) | SiO2(%) | Fe2O3(%) | TiO2(%) | MgO(%) |
Next:None
Recommend Products
|